Y-BlocksForever Forum / Y-BlocksForever! Forums 2006 / Classifieds

parting out 57 fairlane 500 4 door sedan

2X57SEDAN — Wed, 10 Mar 2010 08:12:32 GMT

hey all i have a 57 fairlane 500 4 door sedan that im parting out its a non rolling body it is fairly complete i bought it for the fenders for my sedan and a few other pieces

im in hamilton ohio you can pm me here or email me at stangrunner@fuse.net with requests or questions

i will try to ship anything but the of course the larger stuff will prolly have to be picked up and i can deliver small stuff (within resonable distances) as i dont have a truck at the moment all i have to hual stuff with is a 2004 mustang

i would like to trade parts from this car for parts to fit my sedan

the parts i need for my car 70A are;

a trunklid

a front windshield (preferably tinted)

the "checkmark" sections of the body side trim both

Good Engines Looking for a New Home

frank — Thu, 11 Mar 2010 15:18:06 GMT

I have two good running 272 Y-Block engines that I need to move to make room for a new project. Both are in good condition but are short blocks. One came out of my '55 Crown Victoria and the other came out of a '55 Ranchwagon. I will also give away a good working '55 Fordomatic with torque converter. Everything has been stored inside. I will give them (free) to the first person to show up at my garage near Chicago. Contact me at fifty5kruiser@att.net if you are interested.

Frank

WTB Water Pump Pulley

kevinr — Mon, 08 Mar 2010 16:31:00 GMT

Hi, I am looking for a Water Pump Pulley for a 1960 F350, a 292 engine, 2.5 in from center of groove to front of pulley

Mounting brackets for sunvisors for 1957 fairlane 500

bill1957 — Tue, 09 Feb 2010 05:18:16 GMT

Im sorry I meant to say that I am looking for the mounting brackets for the sunvisors for a 1957 Fairlane 500 2 door post.

Bill

57 tbird

layourman — Sun, 07 Mar 2010 11:21:25 GMT

I am lookiing for nos padded dash for 57 tbird, or a really good used one, does anybody know anything about the reproduction ones? are they easy to install, I have never done this before, and am a little bit leary of doing it, has anybody installed one before, any advise would be appreciated! I guess one should use slow drying glue to install it.

Looking for thermostat housing

YellowWing — Thu, 04 Mar 2010 16:21:19 GMT

If anyone has or knows where I can find a aluminum thermostat housing for a 56 Fairlane please let me know.

Thanks in advance, Mike Johnson
Rimrock AZ

Wanted: ECZ-B 4-barrel manifold

Effieheizer — Tue, 09 Mar 2010 13:04:57 GMT

... need it! Please offer via pm!

LOOKING FOR FORD Y BLOCK VALVE COVER WING NUTS

2188nrha — Sun, 07 Mar 2010 04:57:52 GMT

Hi everyone I am finally getting the pieces together to finally complete building up my 292. Thanks to Charlie for helping me get sorted with a prober timing cover for the engine. I am looking for a set (4) aluminum valve cover wing nuts to go with the moon valve covers I got on e-bay. I am sure I will be asking for more advice as start up time approaches.

223 I6, Bellhousing with Clutch, 3 Speed Trans For Sale

montego_gto — Mon, 01 Mar 2010 09:39:06 GMT

Guys,

After my Y block is swapped in, this inline will be of no use to me. Anyone have an interest in a good running 223 inline 6, good clutch with bellhousing, and a decent 3 speed toploader? I'm not looking to get rich. Scrap value price is a good starting point. Just want to see it go to someone that can use it.

I'm located about an hour north of Milwaukee, WI.

Nick

Y-Block Parts For Sale VI

57FordPU — Sun, 07 Mar 2010 23:06:45 GMT

This is a newly resurfaced flywheel by Tim. It is factory drilled for an 11" clutch. The starter ring has been turned around and the engaging teeth are excellent. The unusual thing with this flywheel is there is absolutely no signs of any heat or stress cracks. It looks like a new surface. The price is $45.00. Please send a PM with your zip code to inquire about shipping cost. Thanks for looking.

Lots of Y-Block parts for sale

57FordPU — Sat, 06 Feb 2010 11:05:23 GMT

It is time to sell the large stash of Y-Block parts that Tim McMaster and I recently acquired. The money from these sales will help finance the BonnevilleComet project. There is not a lot of popular items like G-heads or rams horns, but there is plenty of everyday stuff.

Forum members should have an early opportunity to purchase items if they choose to. Ebay items are cleaned and prepped by Tim. Forum members can purchase items "as is" at reduced prices if that works for you. If you wanted items cleaned and prepped (like cylinder heads), it may take some time to coordinate with Tim.

Here is a link to an item currently on Ebay:

This item is sold, I will post another link as soon as I get something back up on E-Bay.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120529606670&ssPageName=STRK:MESELX:IT

You can click on "save this seller" to view anything that is currently for sale on Ebay from now on.

Please feel free to request items here on this thread, by PM or to my regular email at 57fordpu@sbcglobal.net. I will respond to all requests by PM or return email unless it is a generic question that will benefit others.

Y-Block Parts For Sale V

57FordPU — Fri, 05 Mar 2010 19:53:04 GMT

These are a very nice set of ECG (1.54:1 high ratio) rockers that have been prepared by Tim. There are no new parts as all of these are good. The shafts have been polished and the oil holes have been grooved, the rockers have been honed and the tips have been resurfaced. The head mounting locations on the towers have been surfaced also. The overflow tubes have been eliminated and the shafts are pressurized for improved oiling. This is as nice a set as we have sold so far. Price is $150.00. Please PM with any questions and zip code for shipping costs.

Thanks for looking................Charlie

Sorry, but these are sold.........1.43 to 1 sets coming soon.

Wanted: 1955 Thunderbird automatic output shaft housing

GregW — Sun, 07 Mar 2010 00:22:56 GMT

I need an output shaft housing for a 1955 automatic ford thunderbird or something that is the same.

If you dont have one feel free to chime in on what would work off other models?

Mine has cracks in it and one of the mount holes is cracked off, car was in an accident in the 60's Im sick of it leaking :)

I have a tig but figured Id check here first.

Thanks for any help/suggestions

56 Dash Gauges

55Birdman — Fri, 05 Mar 2010 17:57:30 GMT

I have a complete set of dash gauges for a 56 car. Included are 2 gauge housings. one has no glass one has all the glass. The only gauge I havent checked is the clock. Very good condition. $270.00 shipped. Also have a dash for a 57 bird. no rust extra holes etc $300.00 plus shipping. E-mail me here or at wpccgrad@hotmail.com . Can send pics if you want some.

1954 Ford 239 Y-Block

DE SOTO — Thu, 04 Mar 2010 19:42:05 GMT

I have a '54 239 pretty complete from Later wide base 2bbl to the oil pan & from Fan to Flywheel.

Block says EBU 8015 F

Has Manifolds, V-Covers, Later 2bbl Manifold & Carb.

Pulled out cus it has a rear main leak & they swapped it for a Flathead, Engine was in a '36 Ford Truck.

asking $500.00 or trade for Early Speed Equipment or DeSoto/Chrysler Hemi Parts.

Rick 805-746-9011 DESOTO6X2@AOL.COM

Need one set of used ECG 6554 1.54 ratio rockers...

Daniel Jessup — Mon, 01 Mar 2010 04:56:07 GMT

Anybody have a used set of ECG rockers (only want one side)? Would prefer a decent shaft, wear on rocker pads not too much of an issue, just so long as the play in the rocker pivot is not too terrible. This is going on a used motor that already has a set on one head.

My address is 2581 Northwestern Pike, Winchester, VA 22603. Let me know cost and shipping per USPS priority. (may fit in a flat rate box?)

Dan Jessup

danaxjessup@yahoo.com

300+ HP Y-block Engine with ported ECZ-G heads

rebman — Mon, 22 Feb 2010 16:20:29 GMT

I bought this engine for my '63 Ford F250, but I'm selling the truck and it has to go.

It is a 292 Y-block that has been freshly rebuilt by Tim McMaster (0 miles on it). It has flat cast pistons, double roller timing set, and ported ECZ-G heads with 2.02" in and 1.6" ex. It has full pressure oil 1.54:1 rockers, deep groove center journal, and H. D. push rods. The whole thing was balanced.

If you’re not familiar with his engines, check them out on his website (http://www.yblockguy.com) or on youtube (mctim64). He used to have this one on youtube, but I don’t know if he does anymore.

I also will include 8 quarts of Brad Penn 30w break-in oil and Comp break-in additive for it. Finally, it comes with gaskets and stainless hardware for the manifold, headers, etc.

Asking $2300 or make me an offer...I'm motivated to move this.

Buy it and you can plan a trip to Vegas to pick up the engine! :D

PM or e-mail: [email]brett.vanderford@gmail.com[/email]

[IMG]http://i934.photobucket.com/albums/ad185/63f250/DSC00628.jpg[/IMG]

[IMG]http://i934.photobucket.com/albums/ad185/63f250/DSC00629.jpg[/IMG]

[IMG]http://i934.photobucket.com/albums/ad185/63f250/DSC00630.jpg[/IMG]

[IMG]http://i934.photobucket.com/albums/ad185/63f250/DSC00631.jpg[/IMG]

[IMG]http://i934.photobucket.com/albums/ad185/63f250/DSC00633.jpg[/IMG]

[IMG]http://i934.photobucket.com/albums/ad185/63f250/DSC00634.jpg[/IMG]

FOR SALE: T85 overdrive trans for 1957 tbird...R11-IE tailhousing, 16 spline output shaft

whiskeyrunner — Tue, 23 Feb 2010 01:41:52 GMT

I have a disassembled t85 od trans for sale or trade...it has the R-11 IE tailhousing and I think it fits 1956/1957 t-birds and mercurys.....it has the 16 spline output shaft and the tailhousing is 20' long. If you need more info or know anyone interested please call me at 478-697-7166 or email me at bfw1@planttel.net

I want to replace my cruiseomatic in my 63 1/2 galaxie with the correct galaxie t85....Please call if you know anyone that may have the correct trans or at least the correct tail housing and tailshaft...... All I have besides the one above are for trucks.

Thanks, Billy

Wanted: Edelbrock Script Y-Block finned valve covers

BIGREDTODD — Tue, 23 Jun 2009 15:59:17 GMT

I realize that no-name, Offy, and even chrome valve coveres are available.

My '56 Thunderbird has some history with the Edelbrock team, and I would really like to find a set of clean finned Edelbrock valve covers.

Please email me, with pictures and pricing if possible:

tjolliff@oldcastleglass.com

The home for them, if found:

Y-Block Parts For Sale IV

57FordPU — Thu, 25 Feb 2010 01:01:38 GMT

This is a stock 11" clutch flywheel that we were originally going to run in the race truck (we used aluminum). It was balanced and has a fresh surface and a few heat checks. The starter ring was a little worn, so it was turned around and is very good. $35.00 plus shipping for this one. If you have an interest, please PM or email me with your zip and I will get you a final price with shipping.

This item is sold, but more flywheels are available and comming soon.....

55 bird carb wanted ECK- 9510 FH-List 1074

GregW — Mon, 22 Feb 2010 18:24:57 GMT

ECK- 9510 FH-List 1074 or close enough for me to scavange parts.

Need one for parts

PM me details

Thanks

Gregory

55 56 fORD CONVERTABLE

carl — Mon, 22 Feb 2010 18:47:16 GMT

I need the piece of stainless that goes on the top outside of the windshield for a 55 or 56 ford convertable.it runs the full length of the windshield and connectes to the pillar stainless. If anyone has one they will part with let me know. Carl Ohio

WANTED DEAD OR ALIVE

layourman — Sat, 20 Feb 2010 10:01:32 GMT

This is the carb off of a 57 bird with 312 c.i. automatic. From the factory.

WANTED T-85 Overdrive Yoke

Mark T — Mon, 22 Feb 2010 18:34:08 GMT

I need a 16 spline driveshaft yoke with an outside diameter of 1.685.

55 T-Bird parts

Sanman — Mon, 22 Feb 2010 16:03:47 GMT

Hi,

I have a bunch of 55 T-bird parts for sale, I'm located in Santa Clara, California.

All reasonable offers considered.

Fordomatic complete in good working condition, transmission is clean and painted .

Complete front spindles, with new bearings, brakes and drums, cleaned and painted.

4 stock wheels and tires.

Stock tach drive distributor.

Stock tach with new drive cable.

Stock intake and teapot carb.

Stock radio, I don't know if it works.

57 stock 4bbl manifold.

Give me a call, 650-465-1155

Wanted Dove Rocker Adjusting Screw

charliemccraney — Sun, 21 Feb 2010 19:06:58 GMT

I need at least 1.

WANTED- MASTER CYLINDER

layourman — Mon, 15 Feb 2010 10:45:16 GMT

57 Thunderbird Master cylinder in rebuildable condition, I need one with the correct casting numbers for a concourse car. Thanks. Layourman

55 Ford 4-Door

bloodyknucklehill — Fri, 19 Feb 2010 14:41:05 GMT

Anyone looking for one? I just ran across this,

http://roseburg.craigslist.org/pts/1607569699.html

Intake manifold

dozer59044 — Thu, 11 Feb 2010 16:25:06 GMT

I am trying to improve the performance of my 60 f250 4x4. I am looking to buy a ECZ 9425-B manifold.

If anyone has one they would like to sell please let me know.

Thanks to every one for all the great advice. I am really enjoying getting to know more about these Y-blocks.:D

1955 Ford F600

RodgerF — Fri, 05 Feb 2010 02:11:46 GMT

Guys

I have a 1955 F600 I've decided to sell. It has the Merc. 256, 5 speed with 2 speed rearend. It is a former firetruck with around 25,000 miles. The truck now has a flatbed on it. It runs well and I drove it regularly until last year. I took it off the road after I bought my dump truck. I just have too many vehicles. I have some pictures of it and will post them as soon as I find them. I'm in Virginia but I have the truck on my property in PA, just outside of Pittsburgh.

Trying for $2500 or best offer.

MSD 8383 Distributor NIB

Rudder2fly — Wed, 17 Feb 2010 09:56:09 GMT

Presently on auction at Ebay # 330405755192. Bid at $52.00. No Reserve.

Air Cleaner wanted

paul2748 — Tue, 16 Feb 2010 18:19:03 GMT

I am looking for the bottom of a 57 TBird air cleaner. Any one got one for sale?

3 Deuce swap for 4-bbl

Fifty6Vicky — Sat, 13 Feb 2010 18:48:59 GMT

I have a 3 deuce setup on my '56 312. At the present, only the center carb (a 94) is active with the outside carbs blocked off. It's an Offenhauser manifold. I purchased a set of 2110's with the intent to mount them using a progressive linkage. To make a long story short, I have decided to go to a single 4-bbl. using either a 9425-B or a Blue Thunder for street use and easier maintenance. I haven't heard back from Mummerts about a new BT but if anyone out there has one or even a B they want to work a swap on, I'm open. I also have the ribbed Offenhauser valve covers that I would like to swap out for the TBird covers. Anyone interested?
[img]http://traaca.org/312_3deuce.jpg[/img]

Holley ECZ 9510-B Carb

smokey54 — Sun, 14 Feb 2010 23:29:34 GMT

I have an extra one. Does it have value? It needs a rebuild, but last ran about two years ago and was fine. What's a good asking price?

Looking for a timing cover for F!00 (front motor mount)

2188nrha — Tue, 09 Feb 2010 16:14:55 GMT

HI Guys
Looking for a timing cover (cast or aluminum) for my 292. needs to be for a front motor mounts to install in my 56 F100.

Hope some has one or knows of one out there.

Already contacted John Mummert's, he does not have them in stock.

Thanks.

Wanted Cam Parts

Town Vicky — Mon, 08 Feb 2010 13:17:08 GMT

I need the parts from the front of the gear to the end of the cam.

Town Vicky

wanted marine intake water necks

oldnuts — Wed, 20 Jan 2010 06:45:06 GMT

Need the 2 water necks off a interceptor marine engine. the ones that are on the heads. Need shipped to 68147.

Lots of Y-Block parts for sale III

57FordPU — Tue, 09 Feb 2010 22:26:23 GMT

Here is another item to consider. It is an ECZ 9425-A 4bbl intake. Everything looked great with this intake until I turned it over and found a chip missing on the corner of one of the runner flanges. It still has over 1/8" of mating surface (see picture). There are no repairs and all the 5/16" mounting threads are good and have been chased with a tap. The mounting surfaces have been faced. The price is $25.00 plus shipping (the last one went to GA for $38.00). If you have an interest, please PM or email me with your zip and I will get you a final price. Thanks for looking............

This item is now sold.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=120533637713&ssPageName=STRK:MESELX:IT

Distributor replacement cam

Old Y Block — Mon, 01 Feb 2010 14:13:27 GMT

Hi guys; I'm looking for a replacement cam for a B7A-12175-A distributor shaft. For a 57 to 59 y-block V8 distributor with centrifugal and vacuum advance. Thank you very much in advance :)

Old Y Block :)

Is this a great site or what??

Lots Of Y-Block Parts For Sale II

57FordPU — Mon, 08 Feb 2010 22:02:35 GMT

Just thought I'd start a separate thread to show items for a few days that are readily available. If there is no interest, I will send them off to Ebay.

Y-Block Dual Exhaust Manifolds. These are from a truck with casting numbers C1AE-9431-A and C1AE-9430-B. There are no cracks or repairs. There is some pitting (see picture). There is a heat source on the passenger side that does not have to be used (see picture). Although these were cast with truck numbers, they will fit all Y-Blocks and look just the same. They have been media blasted and mating surfaces have been refaced. The stud threads are good and all have been chased with a tap. The price here is $90.00 plus shipping (Re: shipping, the last two sets went USPS to Ohio and Texas for under $30.00).

Please PM or ask questions here if you have an interest............Thanks for looking.

This item has been sold on e-bay.