|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 7:21 AM
Posts: 2,021,
Visits: 4,100
|
|
Well I've been talking about building a dragster for some time now and have been gathering parts for a month, so now that I've actually got some work done on it I thought I'd share some pix of the process with you guys. I want to thank Charlie Burns for all the help he has given me acquiring parts for the car and I want to say thank you to Ted Eaton for his help with advise and sending me his Y/Powerglide adaptor template, although I've decided to go with a C-4 since the Eagle Field rules now say "no two speed transmissions" but we didn't know that when he sent it. I'll be getting that back to you soon Ted.  The C-4 bell I got from John Mummert, a very nice item indeed. Anyway here is a look at what's going on and there will be more to come. The work is proceeding nicely now and I hope to have a running car for the May 22nd meet, well we'll see.   
  God Bless. Tim http://yblockguy.com/ 338ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake" 312ci Y-Block '58 F-100
tim@yblockguy.com Visalia, California Just west of the Sequoias
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 7:21 AM
Posts: 2,021,
Visits: 4,100
|
|
Hey, and check this out! I was leaving the shop on Tues. when two guys went flying by me with this old beat up trailer, so I followed them all the way to the scrap yard to see what they were doing with it, when they said they were just going to sell it for scrap I offered them the same price and now I have a $100 trailer with a title and everything. I think it will make an excellent Dragster trailer.  
God Bless. Tim http://yblockguy.com/ 338ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake" 312ci Y-Block '58 F-100
tim@yblockguy.com Visalia, California Just west of the Sequoias
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 6:13 PM
Posts: 1,078,
Visits: 5,481
|
|
Looking good Tim, I have been following your HAMB post, but it is much easier here without all the extra BS that goes on over there. Thanks, for posting it here.
Glen Henderson
Freedom is not Free
Letohatchee, AL
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 6:20 PM
Posts: 766,
Visits: 6,245
|
|
| Tim - NICE... what is the deal on your sleeves? Looks like I cannot see them in the other photo of the block...and is that a fabbed up oil pan or what? jessup
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 11:30 AM
Posts: 690,
Visits: 3,068
|
|
Wow Tim! You really have but your energy moving! May feels so close, but I hope you get there in time. Your project is now 5% done . And how thick is your engine plate? I think half of that would have been enough, or is that your adapter plate  Keep on going and send more pics. Are you going to Tig weld or Mig weld your frame? And that Strange steering gear... what was the price for that and where did you get it? We tried to get Strange too, but with no luck...
 Seppo from Kellokoski, Finland www.hollowheads.net (just click the hole in the head to proceed)
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 7:21 AM
Posts: 2,021,
Visits: 4,100
|
|
Daniel Jessup (2/11/2010)
Tim - NICE... what is the deal on your sleeves? Looks like I cannot see them in the other photo of the block...and is that a fabbed up oil pan or what? jessup The block in the frame is just an old rotten 312 out of a boat, which is where I got the pan and front cover, the sleeved block is the one that I will be using. I sleeved the whole block so I could go with a 4.0" bore, I want a big bore and a short stroke so I can wind it up tight. 4.0" x 3.2" 322ci. I have also filled the block to keep it all stiff and will be cooling the heads only. For the heads I have a set of posted "G's" and I will run flat top pistons, I have the ability to go with pop-ups but for now just flat tops. (Eagle Field limits  ) 
This is Johns car (the guy who is helping me with the chassis) it is powered by a 510ci Chrysler, he also has a dislike of the scrub product. as noted on the locker in his shop.  
God Bless. Tim http://yblockguy.com/ 338ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake" 312ci Y-Block '58 F-100
tim@yblockguy.com Visalia, California Just west of the Sequoias
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 7:21 AM
Posts: 2,021,
Visits: 4,100
|
|
Hollow Head (2/11/2010)
Wow Tim! You really have but your energy moving! May feels so close, but I hope you get there in time. Your project is now 5% done . And how thick is your engine plate? I think half of that would have been enough, or is that your adapter plate Keep on going and send more pics. Are you going to Tig weld or Mig weld your frame? And that Strange steering gear... what was the price for that and where did you get it? We tried to get Strange too, but with no luck... 5%? I was thinking more like 7%. The motor plate you see is 1/2" and was for adapting the Powerglide, we have since started a new one made of 1/4" material. I think that is close to half. we are TIG welding and the box came from S&W, the cost? well it was a lot. $500
God Bless. Tim http://yblockguy.com/ 338ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake" 312ci Y-Block '58 F-100
tim@yblockguy.com Visalia, California Just west of the Sequoias
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 7:17 PM
Posts: 298,
Visits: 2,184
|
|
| Tim, that's 10 different kinds of bad-ass...and only 7% done!! Cannot wait to see that in May...just corious, how tight can you wind something like that with the big-bore, short stroke combo? Did I mention bad-ass?
Todd Central California...about half way between Fresno and Sacramento 1956 Thunderbird 1960 F-100 1961 Starliner 312 Y-Block 478" Cadillac 390/375 hp FE   
1972 Ford Ranchero GT
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 11:30 AM
Posts: 690,
Visits: 3,068
|
|
Tim, 500 is nothing . We had to pay over 600 euros, to get ours here. But, that's life up here... Our very limited budget slows us to July or further. No hurry, no worry .
Seppo from Kellokoski, Finland www.hollowheads.net (just click the hole in the head to proceed)
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Today @ 6:20 PM
Posts: 766,
Visits: 6,245
|
|
| Tim, I like both of the bumper stickers on your buddy's locker! We'll be following this build closely. I already bought some things from Charlie to help finance his build -- what you got for sale??? Is this motor going to be blown or naturally aspirated?? I assume naturally aspirated with the G heads right? Any goals for compression numbers? Maybe now would be the time we could get a couple of blogs going on the Y blocks site. Jim and Ted could chime in here, if they like, but I have always thought it would be good to have separate pages for viewing where fellas that are working on a particular build/project could show off what they are doing, how they got it done, etc. Sort of an ongoing idea. It would really help when Ted gets going with all of his test runs, he would have a good place to put all of that information up on the site. Once this snow breaks (my road was just plowed of another 14" tonight - we AIN'T used to this I tell ya) I have got to get going on my VS57 blown build for the display stand! 
|
|
|
|