|
| | | 
Supreme Being
Group: Forum Members
Last Login: Yesterday @ 7:51 PM
Posts: 417, Visits: 3,781 |
| OK, so it's Sat nite- I've got buddies due over in the morning to help with stabbing the new 292 stroker with AOD tranny and I thought I had every known thing worked out - but now after another test (on the floor) when I put power to the starter it engages and spins the flywheel and engine over just as it should but it is not disengaging. So, I can't seem to find anything binding or misaligned? Could I hope that under full install and the engine being ready to fire, that it would kick back into disengage or is that wishful thinking.
I'm too close now to have this kind of a hangup.
thanks for your opinions.
Alan Frakes ~ Tulsa, OK
|
| |
| | | Supreme Being
Group: Forum Members
Last Login: Sunday, January 04, 2009 12:16 AM
Posts: 870, Visits: 5,232 |
| | |
| | |
Supreme Being
Group: Forum Members
Last Login: Yesterday @ 7:51 PM
Posts: 417, Visits: 3,781 |
| Not starting it yet, just cranking it through while it is on the stand. Hope you're right about it kicking away after start-that's what I'm hoping for. seems like this minni starter should be cranking the engine over faster?
Alan Frakes ~ Tulsa, OK
|
| |
| | | Supreme Being
Group: Forum Members
Last Login: Sunday, January 04, 2009 12:16 AM
Posts: 870, Visits: 5,232 |
| | |
| | | Supreme Being
Group: Forum Members
Last Login: Yesterday @ 5:34 PM
Posts: 123, Visits: 683 |
| I have one in my 56 with a 292 ...works great.....Sam
56 victoria |
| |
| | | Supreme Being
Group: Forum Members
Last Login: Yesterday @ 9:09 PM
Posts: 467, Visits: 1,753 |
| Hey Al! Are you sinking or swiming?
Steve Metzger Tucson, Arizona
|
| |
| | |
Supreme Being
Group: Forum Members
Last Login: Yesterday @ 7:51 PM
Posts: 417, Visits: 3,781 |
| Hi Steve, yes I'm still progressing slowly. The new stroker engine and trans are back in the car to replace all the mock up. And the interior is still out of the car so I have any number of areas to spend time on on. Don't have much of that right now but hoping soon to get headed back in that direction.
I never did get the starter to disengage-so as some have said-it will when the engine fires. I'm counting on it.!
Alan Frakes ~ Tulsa, OK
|
| |
|
|