|
|
|
Supreme Being
Group: Forum Members
Last Login: Saturday, February 04, 2012 6:30 PM
Posts: 764,
Visits: 6,220
|
|
| I was on the Fatman Fabrications site looking at their setup for 54-56 Ford front ends. Looks like they have a decent rack and pinion setup for the mid-fifties cars. The site said that the rack and pinion kits have been tested with small block Ford motors, but not with the Y block. Has anyone out there used their kit for the Y block powered 54-56 passenger cars, and what do you think? Dan
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Tuesday, January 31, 2012 12:06 PM
Posts: 103,
Visits: 346
|
|
check the tech articles section, there's a review and pic's. I built my own for my 55'bird, and really like it.
miker
|
|
|
|
|
Co-Administrator
Group: Administrators
Last Login: Friday, February 03, 2012 5:43 PM
Posts: 3,130,
Visits: 2,148
|
|
|
|
|
|
Supreme Being
Group: Forum Members
Last Login: Sunday, December 11, 2011 1:24 PM
Posts: 198,
Visits: 1,314
|
|
I installed a fat man kit on my 56 victoria . Only problem i had was connecting to the original steering column . a little tight with exhaust manifold , but i made it ....the other problem was getting the rac with equal number of turns for both directions , think i have one more adjustment to make , but it drives andhandels well .......Luck...Sam
56 victoria
|
|
|
|